dmesg - Conga TR-3

Return To Conga TR-3 System Information

Linux version 4.10.0-14-generic (buildd@lcy01-01) (gcc version 6.3.0 20170221 (Ubuntu 6.3.0-8ubuntu1) ) #16-Ubuntu SMP Fri Mar 17 15:19:26 UTC 2017 (Ubuntu 4.10.0-14.16-generic 4.10.3)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dd6c1fff] usable
BIOS-e820: [mem 0x00000000dd6c2000-0x00000000dd75efff] reserved
BIOS-e820: [mem 0x00000000dd75f000-0x00000000dd779fff] ACPI data
BIOS-e820: [mem 0x00000000dd77a000-0x00000000ddc12fff] ACPI NVS
BIOS-e820: [mem 0x00000000ddc13000-0x00000000ddf21fff] reserved
BIOS-e820: [mem 0x00000000ddf22000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fe100000-0x00000000fe1fffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fedc0000-0x00000000fedc0fff] reserved
BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedc8fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000003feffffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.0 present.
DMI: congatec conga-TR3/conga-TR3, BIOS 5.11 07/19/16
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x3ff000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-through
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFE0000000 write-back
  3 base 0000DF000000 mask FFFFFF000000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 000000041f000000 aka 16880M
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
total RAM covered: 3568M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 1G 	num_reg: 3  	lose cover RAM: 0G
e820: update [mem 0xdf000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcb80-0x000fcb8f] mapped at [ffff9d77c00fcb80]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff9d77c0097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0xa0028000, 0xa0028fff] PGTABLE
BRK [0xa0029000, 0xa0029fff] PGTABLE
BRK [0xa002a000, 0xa002afff] PGTABLE
BRK [0xa002b000, 0xa002bfff] PGTABLE
BRK [0xa002c000, 0xa002cfff] PGTABLE
BRK [0xa002d000, 0xa002dfff] PGTABLE
RAMDISK: [mem 0x32dfd000-0x356f5fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DD764080 000084 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000DD76D268 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x00000000DD764198 0090CA (v02 ALASKA A M I    01072009 INTL 20120913)
ACPI: FACS 0x00000000DDC11D80 000040
ACPI: APIC 0x00000000DD76D378 00007E (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000DD76D3F8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FIDT 0x00000000DD76D440 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x00000000DD76D4E0 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
ACPI: HPET 0x00000000DD76D520 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
ACPI: IVRS 0x00000000DD76D558 0000D0 (v02 AMD    AGESA    00000001 AMD  00000000)
ACPI: SSDT 0x00000000DD76D628 000854 (v01 AMD    AGESA    00000001 AMD  00000001)
ACPI: SSDT 0x00000000DD76DE80 00873A (v02 AMD    AGESA    00000002 MSFT 04000000)
ACPI: CRAT 0x00000000DD7765C0 000550 (v01 AMD    AGESA    00000001 AMD  00000001)
ACPI: SSDT 0x00000000DD776B10 00147F (v01 AMD    CPMDFIGP 00000001 INTL 20120913)
ACPI: SSDT 0x00000000DD777F90 0015F0 (v01 AMD    CPMCMN   00000001 INTL 20120913)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000003feffffff]
NODE_DATA(0) allocated [mem 0x3fefd3000-0x3feffdfff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x00000003feffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009cfff]
  node   0: [mem 0x0000000000100000-0x00000000dd6c1fff]
  node   0: [mem 0x00000000ddf22000-0x00000000deffffff]
  node   0: [mem 0x0000000100000000-0x00000003feffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000003feffffff]
On node 0 totalpages: 4052796
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3996 pages, LIFO batch:0
  DMA32 zone: 14175 pages used for memmap
  DMA32 zone: 907168 pages, LIFO batch:31
  Normal zone: 49088 pages used for memmap
  Normal zone: 3141632 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdd6c2000-0xdd75efff]
PM: Registered nosave memory: [mem 0xdd75f000-0xdd779fff]
PM: Registered nosave memory: [mem 0xdd77a000-0xddc12fff]
PM: Registered nosave memory: [mem 0xddc13000-0xddf21fff]
PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfe0fffff]
PM: Registered nosave memory: [mem 0xfe100000-0xfe1fffff]
PM: Registered nosave memory: [mem 0xfe200000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedbffff]
PM: Registered nosave memory: [mem 0xfedc0000-0xfedc0fff]
PM: Registered nosave memory: [mem 0xfedc1000-0xfedc1fff]
PM: Registered nosave memory: [mem 0xfedc2000-0xfedc8fff]
PM: Registered nosave memory: [mem 0xfedc9000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff9d7bbec00000 s107800 r8192 d31464 u524288
pcpu-alloc: s107800 r8192 d31464 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 3989448
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 15827732K/16211184K available (9056K kernel code, 1665K rwdata, 3812K rodata, 2228K init, 2364K bss, 383452K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:524544 nr_irqs:1000 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2096.030 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4192.06 BogoMIPS (lpj=8384120)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160930
ACPI: 5 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 32K
ftrace: allocating 34158 entries in 134 pages
smpboot: Max logical packages: 1
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Embedded R-Series RX-421BD Radeon R7 (family: 0x15, model: 0x60, stepping: 0x1)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      6
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (16768.24 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xdd77a000-0xddc12fff] (4820992 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time:  0:00:06, date: 01/01/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [P0SD] (off)
ACPI: Power Resource [P3SD] (off)
ACPI: Power Resource [P0U2] (off)
ACPI: Power Resource [P3U2] (off)
ACPI: Power Resource [P0U3] (off)
ACPI: Power Resource [P3U3] (off)
ACPI: Power Resource [P0ST] (on)
ACPI: Power Resource [P3ST] (on)
ACPI: Power Resource [P0SA] (off)
ACPI: Power Resource [P3SA] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfed3ffff window]
pci_bus 0000:00: root bus resource [mem 0xfedca000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1576] type 00 class 0x060000
pci 0000:00:00.0: System wakeup disabled by ACPI
pci 0000:00:00.2: [1022:1577] type 00 class 0x080600
pci 0000:00:01.0: [1002:9874] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
pci 0000:00:01.0: reg 0x20: [io  0xf000-0xf0ff]
pci 0000:00:01.0: reg 0x24: [mem 0xfe400000-0xfe43ffff]
pci 0000:00:01.0: reg 0x30: [mem 0xfe440000-0xfe45ffff pref]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xfe464000-0xfe467fff 64bit]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:157b] type 00 class 0x060000
pci 0000:00:02.2: [1022:157c] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: System wakeup disabled by ACPI
pci 0000:00:02.5: [1022:157c] type 01 class 0x060400
pci 0000:00:02.5: PME# supported from D0 D3hot D3cold
pci 0000:00:02.5: System wakeup disabled by ACPI
pci 0000:00:03.0: [1022:157b] type 00 class 0x060000
pci 0000:00:08.0: [1022:1578] type 00 class 0x108000
pci 0000:00:08.0: reg 0x10: [mem 0xf0800000-0xf081ffff 64bit pref]
pci 0000:00:08.0: reg 0x18: [mem 0xfe200000-0xfe2fffff]
pci 0000:00:08.0: reg 0x1c: [mem 0xfe46f000-0xfe46ffff]
pci 0000:00:08.0: reg 0x24: [mem 0xfe46a000-0xfe46bfff]
pci 0000:00:09.0: [1022:157d] type 00 class 0x060000
pci 0000:00:09.2: [1022:157a] type 00 class 0x040300
pci 0000:00:09.2: reg 0x10: [mem 0xfe460000-0xfe463fff]
pci 0000:00:09.2: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [1022:7914] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xfe468000-0xfe469fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1022:7901] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io  0xf140-0xf147]
pci 0000:00:11.0: reg 0x14: [io  0xf130-0xf133]
pci 0000:00:11.0: reg 0x18: [io  0xf120-0xf127]
pci 0000:00:11.0: reg 0x1c: [io  0xf110-0xf113]
pci 0000:00:11.0: reg 0x20: [io  0xf100-0xf10f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe46d000-0xfe46d3ff]
pci 0000:00:11.0: PME# supported from D3hot
pci 0000:00:12.0: [1022:7908] type 00 class 0x0c0320
pci 0000:00:12.0: reg 0x10: [mem 0xfe46c000-0xfe46c0ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1570] type 00 class 0x060000
pci 0000:00:18.1: [1022:1571] type 00 class 0x060000
pci 0000:00:18.2: [1022:1572] type 00 class 0x060000
pci 0000:00:18.3: [1022:1573] type 00 class 0x060000
pci 0000:00:18.4: [1022:1574] type 00 class 0x060000
pci 0000:00:18.5: [1022:1575] type 00 class 0x060000
pci 0000:01:00.0: [1204:0008] type 00 class 0xff0000
pci 0000:01:00.0: reg 0x10: [mem 0xfe000000-0xfe0000ff]
pci 0000:01:00.0: reg 0x14: [mem 0xfd800000-0xfdffffff]
pci 0000:01:00.0: reg 0x18: [io  0xe300-0xe3ff]
pci 0000:01:00.0: reg 0x1c: [io  0xe200-0xe2ff]
pci 0000:01:00.0: reg 0x20: [io  0xe100-0xe1ff]
pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe0ff]
pci 0000:00:02.2: PCI bridge to [bus 01]
pci 0000:00:02.2:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.2:   bridge window [mem 0xfd800000-0xfe0fffff]
pci 0000:02:00.0: [8086:1539] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xfe300000-0xfe31ffff]
pci 0000:02:00.0: reg 0x1c: [mem 0xfe320000-0xfe323fff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:02.5: PCI bridge to [bus 02]
pci 0000:00:02.5:   bridge window [mem 0xfe300000-0xfe3fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 10 11 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 10 11 *14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 10 11 14 15) *0
ACPI: Enabled 1 GPEs in block 00 to 1F
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:01.0: vgaarb: setting as boot VGA device
pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:01.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdd6c2000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x3ff000000-0x3ffffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xc0000000-0xdfffffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io  0x04d0-0x04d1] has been reserved
system 00:05: [io  0x040b] has been reserved
system 00:05: [io  0x04d6] has been reserved
system 00:05: [io  0x0c00-0x0c01] has been reserved
system 00:05: [io  0x0c14] has been reserved
system 00:05: [io  0x0c50-0x0c51] has been reserved
system 00:05: [io  0x0c52] has been reserved
system 00:05: [io  0x0c6c] has been reserved
system 00:05: [io  0x0c6f] has been reserved
system 00:05: [io  0x0cd0-0x0cd1] has been reserved
system 00:05: [io  0x0cd2-0x0cd3] has been reserved
system 00:05: [io  0x0cd4-0x0cd5] has been reserved
system 00:05: [io  0x0cd6-0x0cd7] has been reserved
system 00:05: [io  0x0cd8-0x0cdf] has been reserved
system 00:05: [io  0x0800-0x089f] has been reserved
system 00:05: [io  0x0900-0x090f] has been reserved
system 00:05: [io  0x0910-0x091f] has been reserved
system 00:05: [io  0xfe00-0xfefe] has been reserved
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:05: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:05: [mem 0xfeb00000-0xfeb00fff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
pci 0000:00:02.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:02.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:02.2: BAR 15: assigned [mem 0xf0900000-0xf0afffff 64bit pref]
pci 0000:00:02.2: PCI bridge to [bus 01]
pci 0000:00:02.2:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.2:   bridge window [mem 0xfd800000-0xfe0fffff]
pci 0000:00:02.2:   bridge window [mem 0xf0900000-0xf0afffff 64bit pref]
pci 0000:00:02.5: PCI bridge to [bus 02]
pci 0000:00:02.5:   bridge window [mem 0xfe300000-0xfe3fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfed3ffff window]
pci_bus 0000:00: resource 11 [mem 0xfedca000-0xffffffff window]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfd800000-0xfe0fffff]
pci_bus 0000:01: resource 2 [mem 0xf0900000-0xf0afffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xfe300000-0xfe3fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 41956K
AMD-Vi: IOMMU performance counters supported
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: not connected
iommu: Adding device 0000:00:01.0 to group 0
iommu: Using direct mapping for device 0000:00:01.0
iommu: Adding device 0000:00:01.1 to group 0
iommu: Adding device 0000:00:02.0 to group 1
iommu: Adding device 0000:00:02.2 to group 1
iommu: Adding device 0000:00:02.5 to group 1
iommu: Adding device 0000:00:03.0 to group 2
iommu: Adding device 0000:00:08.0 to group 3
iommu: Adding device 0000:00:09.0 to group 4
iommu: Adding device 0000:00:09.2 to group 4
iommu: Adding device 0000:00:10.0 to group 5
iommu: Adding device 0000:00:11.0 to group 6
iommu: Adding device 0000:00:12.0 to group 7
iommu: Adding device 0000:00:14.0 to group 8
iommu: Adding device 0000:00:14.3 to group 8
iommu: Adding device 0000:00:18.0 to group 9
iommu: Adding device 0000:00:18.1 to group 9
iommu: Adding device 0000:00:18.2 to group 9
iommu: Adding device 0000:00:18.3 to group 9
iommu: Adding device 0000:00:18.4 to group 9
iommu: Adding device 0000:00:18.5 to group 9
iommu: Adding device 0000:01:00.0 to group 1
iommu: Adding device 0000:02:00.0 to group 1
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features (0x37ef22294ada):
 PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000007ff)
perf: amd_iommu: Detected. (0 banks, 0 counters/bank)
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1451606406.368:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.2: Signaling PME with IRQ 26
pcieport 0000:00:02.5: Signaling PME with IRQ 27
pciehp 0000:00:02.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep+
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffbb9342000000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ADP1] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (24 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (24 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.0: EHCI Host Controller
ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.0: debug port 2
ehci-pci 0000:00:12.0: irq 18, io mem 0xfe46c000
ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.10.0-14-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.10.0-14-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:10.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.10.0-14-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:10.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0: patch_level=0x06006115
microcode: CPU1: patch_level=0x06006115
microcode: CPU2: patch_level=0x06006115
microcode: CPU3: patch_level=0x06006115
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 3026a30c6065f72f4597dde8a3dfd1906e157453'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
  Magic number: 0:1:0
memory memory48: hash matches
rtc_cmos 00:03: setting system clock to 2016-01-01 00:00:07 UTC (1451606407)
acpi_cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2228K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1168K
Freeing unused kernel memory: 284K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
[drm] Initialized
dca service started, version 1.12.1
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part 
scsi host0: ahci
scsi host1: ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m1024@0xfe46d000 port 0xfe46d180 irq 19
[drm] amdgpu kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel 
Found CRAT image with size=1360
Parsing CRAT table with 1 nodes
Found CU entry in CRAT table with proximity_domain=0 caps=0
CU CPU: cores=4 id_base=16
Found CU entry in CRAT table with proximity_domain=0 caps=0
CU GPU: simds=40 id_base=-2147483648
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=16
Found cache entry in CRAT table with processor_id=17
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=18
Found cache entry in CRAT table with processor_id=19
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Creating topology SYSFS entries
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
fb: switching to amdgpudrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (CARRIZO 0x1002:0x9874 0x1002:0x1841 0x84).
[drm] register mmio base: 0xFE400000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xF0000000
[drm] doorbell mmio size: 8388608
[drm] UVD is enabled in physical mode
[drm] VCE enabled in physical mode
ATOM BIOS: CARRIZO
[drm] GPU post is not needed
amdgpu 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
amdgpu 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 64bits UNKNOWN
[TTM] Zone  kernel: Available graphics memory: 7969676 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 512M of VRAM memory ready
[drm] amdgpu: 1024M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x0000000000040000).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
amdgpu 0000:00:01.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
amdgpu: powerplay initialized
[drm] AMDGPU Display Connectors
[drm] Connector 0:
[drm]   DP-1
[drm]   HPD2
[drm]   DDC: 0x486c 0x486c 0x486d 0x486d 0x486e 0x486e 0x486f 0x486f
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm]   DP-2
[drm]   HPD3
[drm]   DDC: 0x4870 0x4870 0x4871 0x4871 0x4872 0x4872 0x4873 0x4873
[drm]   Encoders:
[drm]     DFP2: INTERNAL_UNIPHY1
[drm] Connector 2:
[drm]   DP-3
[drm]   HPD1
[drm]   DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b
[drm]   Encoders:
[drm]     DFP3: INTERNAL_UNIPHY
amdgpu 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000010, cpu addr 0xffff9d7ba3870010
amdgpu 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000020, cpu addr 0xffff9d7ba3870020
amdgpu 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000030, cpu addr 0xffff9d7ba3870030
amdgpu 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000040, cpu addr 0xffff9d7ba3870040
amdgpu 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000050, cpu addr 0xffff9d7ba3870050
amdgpu 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000020000060, cpu addr 0xffff9d7ba3870060
amdgpu 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000070, cpu addr 0xffff9d7ba3870070
amdgpu 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000080, cpu addr 0xffff9d7ba3870080
amdgpu 0000:00:01.0: fence driver on ring 8 use gpu addr 0x0000000020000090, cpu addr 0xffff9d7ba3870090
amdgpu 0000:00:01.0: fence driver on ring 9 use gpu addr 0x00000000200000a0, cpu addr 0xffff9d7ba38700a0
amdgpu 0000:00:01.0: fence driver on ring 10 use gpu addr 0x00000000200000b0, cpu addr 0xffff9d7ba38700b0
[drm] Found UVD firmware Version: 1.87 Family ID: 11
amdgpu 0000:00:01.0: fence driver on ring 11 use gpu addr 0x00000000002946e0, cpu addr 0xffffbb93430416e0
[drm] Found VCE firmware Version: 52.4 Binary ID: 3
amdgpu 0000:00:01.0: fence driver on ring 12 use gpu addr 0x00000000200000d0, cpu addr 0xffff9d7ba38700d0
amdgpu 0000:00:01.0: fence driver on ring 13 use gpu addr 0x00000000200000e0, cpu addr 0xffff9d7ba38700e0
pps pps0: new PPS source ptp0
igb 0000:02:00.0: added PHC on eth0
igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:13:95:20:f2:1f
igb 0000:02:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:02:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
[drm] ring test on 0 succeeded in 12 usecs
[drm] ring test on 1 succeeded in 18 usecs
[drm] ring test on 2 succeeded in 28 usecs
[drm] ring test on 3 succeeded in 14 usecs
[drm] ring test on 4 succeeded in 14 usecs
[drm] ring test on 5 succeeded in 14 usecs
[drm] ring test on 6 succeeded in 14 usecs
[drm] ring test on 7 succeeded in 15 usecs
[drm] ring test on 8 succeeded in 14 usecs
[drm] ring test on 9 succeeded in 3 usecs
[drm] ring test on 10 succeeded in 4 usecs
acpi device:02: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
igb 0000:02:00.0 enp2s0: renamed from eth0
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=0438, idProduct=7900
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
tsc: Refined TSC clocksource calibration: 2096.066 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e36ac511b1, max_idle_ns: 440795308042 ns
[drm] ring test on 11 succeeded in 1 usecs
[drm] UVD initialized successfully.
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
[drm] ring test on 12 succeeded in 10 usecs
[drm] ring test on 13 succeeded in 2 usecs
[drm] VCE initialized successfully.
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-8: SSDS3-0240-XQC8(011), S8FM07.9, max UDMA/133
ata2.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      SSDS3-0240-XQC8( 07.9 PQ: 0 ANSI: 5
[drm] fb mappable at 0xE0615000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm]    pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
amdgpu 0000:00:01.0: fb0: amdgpudrmfb frame buffer device
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 1:0:0:0: [sda] Attached SCSI disk
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
usb 1-1.1: new low-speed USB device number 3 using ehci-pci
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
usb 1-1.1: New USB device found, idVendor=093a, idProduct=2510
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1: Product: USB Optical Mouse
usb 1-1.1: Manufacturer: PixArt
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:093A:2510.0001/input/input3
hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:12.0-1.1/input0
usb 1-1.2: new low-speed USB device number 4 using ehci-pci
clocksource: Switched to clocksource tsc
usb 1-1.2: New USB device found, idVendor=03f0, idProduct=0024
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: HP Basic USB Keyboard
usb 1-1.2: Manufacturer: CHICONY
input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:03F0:0024.0002/input/input4
hid-generic 0003:03F0:0024.0002: input,hidraw1: USB HID v1.11 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:12.0-1.2/input0
kfd kfd: Allocated 3944480 bytes on gart for device(1002:9874)
amdkfd: adding doorbell packet type capability
kfd kfd: added device (1002:9874)
[drm] Initialized amdgpu 3.9.0 20150101 for 0000:00:01.0 on minor 0
random: fast init done
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: System time before build time, advancing clock.
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Created slice System Slice.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[263]: Received request to flush runtime journal from PID 1
Adding 2097148k swap on /swapfile.  Priority:-1 extents:6 across:2260988k SSFS
audit: type=1400 audit(1478193402.336:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=430 comm="apparmor_parser"
audit: type=1400 audit(1478193402.336:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=431 comm="apparmor_parser"
audit: type=1400 audit(1478193402.336:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="url-dispatcher-bad-url-helper" pid=434 comm="apparmor_parser"
audit: type=1400 audit(1478193402.340:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=432 comm="apparmor_parser"
audit: type=1400 audit(1478193402.340:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=432 comm="apparmor_parser"
audit: type=1400 audit(1478193402.340:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="unity8-dash" pid=437 comm="apparmor_parser"
audit: type=1400 audit(1478193402.344:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=433 comm="apparmor_parser"
audit: type=1400 audit(1478193402.344:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=433 comm="apparmor_parser"
audit: type=1400 audit(1478193402.344:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=433 comm="apparmor_parser"
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
cgroup: new mount options do not match the existing superblock, will be ignored
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
snd_hda_intel 0000:00:01.1: Force to non-snoop mode
snd_hda_intel 0000:00:09.2: no codecs found!
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
EDAC MC: Ver: 3.0.0
MCE: In-kernel MCE decoding enabled.
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
[ powerplay ] min_core_set_clock not set
igb 0000:02:00.0 enp2s0: igb: enp2s0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
snd_hda_intel 0000:00:01.1: azx_get_response timeout, switching to polling mode: last cmd=0x000f0001
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
random: crng init done
TCP: enp2s0: Driver has suspect GRO implementation, TCP performance may be compromised.
pp_dpm_get_sclk_od was not implemented.
pp_dpm_get_sclk_od was not implemented.
perf: interrupt took too long (2512 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
pp_dpm_get_sclk_od was not implemented.
pp_dpm_get_sclk_od was not implemented.

Return To Conga TR-3 System Information